Home » Learn About Solar Lighting » Why streetlights alone aren’t enough for pedestrians

Educational   20 November 2026

 

Why streetlights alone aren’t enough for pedestrians

 

 

It’s no secret that many American streets are unwelcoming and often unsafe for people on foot. Anyone who’s walked alongside fast-moving traffic, negotiated a disappearing sidewalk in a wheelchair, or crossed six lanes to get to the grocery store knows how it feels to use streets that weren’t designed for them.

 

It’s not just that it’s uncomfortable. Drivers struck and killed 6,732 pedestrians in 2025, roughly three-quarters of them after dark. While that’s down 7% from the year before, and the third consecutive year of decline, deaths were still nearly 20% higher than a decade earlier. As Smart Growth America observed, “Slightly less deadly is not the same as safe.”

 

Better lighting is one of the most effective ways to protect people after dark, but simply adding more streetlights won’t fix the problem. Creating safe, walkable streets requires a different kind of lighting—one that helps pedestrians navigate with confidence while making them clearly visible to drivers.

 

The limits of traditional street lighting

 

Overhead streetlights are designed for a single type of road user: the driver. Tall poles, wide spacing, and specialized optics (the components that shape and direct light from a fixture) do a great job of illuminating traffic lanes, but not much outside them.

 

Because poles are set high and far apart, sidewalks often end up a patchwork of bright spots and dark gaps, with trees, awnings, and bus shelters only making things worse. Moving between light and dark forces the eye to constantly readjust, leading to visual fatigue and slower reaction times.

 

It causes issues for drivers, too. At crossings, misaligned poles can leave pedestrians silhouetted against a brightly lit background (a condition called negative contrast). Even standing directly beneath a streetlight doesn’t guarantee visibility, as downward-aimed beams mostly light the top of a person’s head and the pavement at their feet rather than the side of their face and body.

 

In lighting terms, it’s the difference between horizontal illuminance (light on flat surfaces like the road) and vertical illuminance (light on upright surfaces like a person). Drivers need both to make out human figures against busy nighttime backgrounds, and traditional streetlights come up short.

 

What effective pedestrian lighting looks like

 

Protecting people on foot starts with bringing light down to human scale. Instead of towering over the road, dedicated pedestrian fixtures sit lower—typically under 20 feet—and are spaced closer together, filling in the gaps left by streetlights.

 

Optics matter, too. Whereas roadway fixtures flood wide lanes of traffic, pedestrian-specific lenses—like Cyclone’s crosswalk optic—use asymmetrical distributions to direct light across sidewalks and crossings. That difference boosts vertical illuminance to make people visible to drivers, while still keeping the ground bright enough for pedestrians to spot curbs, cracks, and pavement markings.

 

At crosswalks, special care is needed to avoid the backlighting problem caused by poorly positioned overhead poles. The FHWA recommends positioning lights before the crossing from an approaching driver’s perspective and on both sides of a two-way street. That angle illuminates the side of a pedestrian facing oncoming traffic, creating the positive contrast drivers need.

 

Finally, since most sidewalks don’t see rush-hour foot traffic at 2 a.m., pedestrian lighting doesn’t always need to run at full blast from dusk to dawn. Adaptive controls like scheduled dimming and motion detection keep walkways safely lit during busy evening hours, cut energy use when they’re empty, and (in the case of motion detection) brighten the lights when someone approaches.

 

Filling the gaps with solar

 

Even when cities know how to light pedestrian spaces effectively, adding new systems to developed streets is complicated and expensive. Cutting into concrete, digging around buried utilities, and closing roads drive up costs and disrupt neighborhoods—and extending power to off-street paths and greenways comes with a whole other set of challenges.

 

Solar lighting provides a way around that work. Each system generates and stores its own power, so cities can quickly place pedestrian-scale lights wherever they’re needed, filling dark stretches of sidewalk or lighting crosswalks without trenching or grid connections. Grid independence also builds resiliency, keeping walkways and crossings lit even during power outages.

 

Take Albuquerque’s Central Avenue, where median-mounted streetlights illuminated the road while leaving the sidewalks on either side poorly lit. To bring dedicated light to pedestrians without tearing up pavement or blocking access to local businesses, the City installed 187 EverGen solar engines with Cyclone Domia fixtures, improving visibility and making the corridor more inviting after dark.

 

Safer streets for everyone

 

A trip to the grocery store shouldn’t be a test of courage. Making streets safer for pedestrians takes more than lighting, but ensuring people can see their surroundings—and be seen by drivers—is non-negotiable.

 

By decoupling new lighting from expensive underground infrastructure, communities can act faster, put lights where they’re needed, and turn streets built for cars into places where people on foot feel visible, comfortable, and welcome.

 

Other news articles you might be interested in

Albuquerque brings solar lighting to one of America’s deadliest roads

McFarland turns vacant land into award-winning community trail and gathering space

Solar lighting improves safety along a high-risk Albuquerque road

man installing light fixture

Subscribe to our newsletter

 

Get the latest company and industry news sent straight to your inbox.

 

Do you have a project ?

 

No matter the size or scope, we’d love to hear from you!